LXVI. Network Functions

Введение

Требования

Эти функции всегда доступны.

Установка

Для использования этих функций не требуется проведение установки, поскольку они являются частью ядра PHP.

Настройка во время выполнения

Поведение этих функций находится в зависимости от установок в php.ini.

Таблица 1. Network Configuration Options

NameDefaultChangeable
define_syslog_variables"0"PHP_INI_ALL
For further details and definition of the PHP_INI_* constants see ini_set().

Here is a short explanation of the configuration directives.

define_syslog_variables boolean

Whether or not to define the various syslog variables (e.g. $LOG_PID, $LOG_CRON, etc.). Turning it off is a good idea performance-wise. At runtime, you can define these variables by calling define_syslog_variables().

Типы ресурсов

Данное расширение не определяет никакие типы ресурсов.

Предопределенные константы

Перечисленные ниже константы всегда доступны как часть ядра PHP.

Таблица 2. openlog() Options

ConstantDescription
LOG_CONS if there is an error while sending data to the system logger, write directly to the system console
LOG_NDELAY open the connection to the logger immediately
LOG_ODELAY (default) delay opening the connection until the first message is logged
LOG_NOWAIT 
LOG_PERRORprint log message also to standard error
LOG_PIDinclude PID with each message

Таблица 3. openlog() Facilities

ConstantDescription
LOG_AUTH security/authorization messages (use LOG_AUTHPRIV instead in systems where that constant is defined)
LOG_AUTHPRIVsecurity/authorization messages (private)
LOG_CRONclock daemon (cron and at)
LOG_DAEMONother system daemons
LOG_KERNkernel messages
LOG_LOCAL0 ... LOG_LOCAL7reserved for local use, these are not available in Windows
LOG_LPRline printer subsystem
LOG_MAILmail subsystem
LOG_NEWSUSENET news subsystem
LOG_SYSLOGmessages generated internally by syslogd
LOG_USERgeneric user-level messages
LOG_UUCPUUCP subsystem

Таблица 4. syslog() Priorities (in descending order)

ConstantDescription
LOG_EMERGsystem is unusable
LOG_ALERTaction must be taken immediately
LOG_CRITcritical conditions
LOG_ERRerror conditions
LOG_WARNINGwarning conditions
LOG_NOTICEnormal, but significant, condition
LOG_INFOinformational message
LOG_DEBUGdebug-level message

Таблица 5. dns_get_record() Options

ConstantDescription
DNS_AIPv4 Address Resource
DNS_MXMail Exchanger Resource
DNS_CNAMEAlias (Canonical Name) Resource
DNS_NSAuthoritative Name Server Resource
DNS_PTRPointer Resource
DNS_HINFOHost Info Resource (See RFC 1010 for the meaning of these values)
DNS_SOAStart of Authority Resource
DNS_TXTText Resource
DNS_ANYAny Resource Record. On most systems this returns all resource records, however it should not be counted upon for critical uses. Try DNS_ALL instead.
DNS_AAAAIPv6 Address Resource
DNS_ALLItteratively query the name server for each available record type.
Содержание
checkdnsrr --  Check DNS records corresponding to a given Internet host name or IP address
closelog -- Close connection to system logger
debugger_off -- Disable internal PHP debugger (PHP 3)
debugger_on -- Enable internal PHP debugger (PHP 3)
define_syslog_variables -- Initializes all syslog related constants
dns_check_record -- Synonym for checkdnsrr()
dns_get_mx -- Synonym for getmxrr()
dns_get_record --  Fetch DNS Resource Records associated with a hostname
fsockopen --  Open Internet or Unix domain socket connection
gethostbyaddr --  Get the Internet host name corresponding to a given IP address
gethostbyname --  Get the IP address corresponding to a given Internet host name
gethostbynamel --  Get a list of IP addresses corresponding to a given Internet host name
getmxrr --  Get MX records corresponding to a given Internet host name
getprotobyname --  Get protocol number associated with protocol name
getprotobynumber --  Get protocol name associated with protocol number
getservbyname --  Get port number associated with an Internet service and protocol
getservbyport --  Get Internet service which corresponds to port and protocol
ip2long --  Converts a string containing an (IPv4) Internet Protocol dotted address into a proper address.
long2ip --  Converts an (IPv4) Internet network address into a string in Internet standard dotted format
openlog -- Open connection to system logger
pfsockopen --  Open persistent Internet or Unix domain socket connection
socket_get_status --  Alias of stream_get_meta_data().
socket_set_blocking -- Alias for stream_set_blocking()
socket_set_timeout -- Alias for stream_set_timeout()
syslog -- Generate a system log message